當前位置:網站首頁 > 新聞資訊 > 行業資訊
行業資訊 | ALL PRODUCTS
  • 熱熔壓敏膠在PE快递袋上的应用
  • 本站編輯:杭州大偉膠粘劑有限公司发布日期:2019-09-20 19:59 浏覽次數:
一、熱熔壓敏膠的應用:
 
I. Application of Hot Melt Pressure Sensitive Adhesives:
 
 
 
压敏胶因使用方便,用途广泛,故发展异常迅速,国内外近几年的增长速度都在10%以上。而随着环保要求和社会法规的日益完善,压敏胶剂也从溶剂性向水性转变,水性压敏胶的市场和应用前景十分火爆。杭州大伟熱熔壓敏膠胶型号多样,广泛应用于打点胶、防滑胶、PE快递袋、牛皮纸快递袋、化妆镜、瓶盖、手提袋封底、鞋用贴合、袋式纸、包装、A4纸封口等领域。
 
Pressure-sensitive adhesives have developed rapidly because of their convenient use and wide use. The growth rate of pressure-sensitive adhesives at home and abroad in recent years is more than 10%. With the improvement of environmental protection requirements and social regulations, pressure-sensitive adhesives have also changed from solvent to water-based, and the market and application prospects of water-based pressure-sensitive adhesives are very hot. Hangzhou Dawei Hot Melt Pressure Sensitive Adhesive has a variety of types, which are widely used in doping glue, anti-skid glue, PE express bags, kraft paper express bags, cosmetic mirrors, bottle caps, handbag seals, shoe seals, bag paper, packaging, A4 paper seals and other fields.
 
 
 
 
 
二、熱熔壓敏膠用于PE快递袋:
 
2. Hot melt pressure sensitive adhesive for PE express bags:
 
 
 
主要用于快遞塑料袋封口,具有初粘性好、塗膠量少、粘接強度高的特點。
 
It is mainly used for sealing express plastic bags. It has the characteristics of good initial adhesion, less glue amount and high bonding strength.
 
 
 
産品類型及參數:
 
Product type and parameters:
 
 
 
(1)型號:TD-9031
 
(1) Model: TD-9031
 
 
 
顔色:黃色
 
Colour: Yellow
 
 
 
粘度:1900±100 CPS/180℃
 
Viscosity: 1900 +100 CPS/180 Temperature
 
 
 
軟化點:85±5℃
 
Softening point: 85 ± 5 ℃
 
 
 
操作溫度:160-180℃
 
Operating temperature: 160-180 C
 
 
 
應用:PE快遞袋
 
Application: PE Express Bag
 
 
 
三、注意事項:
 
3. Notes:
 
 
 
1.膠的使用溫度一般控制在160-180℃,儀表盤顯示溫度與實際溫度可能有偏差,請做好溫度調整避免出現長時間高溫下加熱,影響膠水的質量;
 
1. The use temperature of glue is generally controlled at 160-180 C. The display temperature of instrument panel may deviate from the actual temperature. Please adjust the temperature well to avoid heating for a long time at high temperature, which will affect the quality of glue.
 
 
 
2.隨裝訂車間溫度變化,膠的流動性、固化時間也隨之變化,請及時調整熔膠槽的溫度和膠裝機的裝訂速度;
 
2. With the change of temperature in binding workshop, the fluidity and curing time of glue also change. Please adjust the temperature of molten glue tank and the binding speed of binding machine in time.
 
 
 
3.定期清理熔膠槽的殘膠及外帶入的雜質,防止因局部過熱而引起膠的老化、結焦、影響膠的裝訂質量;
 
3. Clean up the residual glue and impurities in the melt trough regularly to prevent the aging, coking and affecting the binding quality of glue caused by local overheating.
 
 
 
4.不宜與其他廠家的膠種混用,以免發生質量事故;
 
4. It is not suitable to mix with rubber seeds from other manufacturers in order to avoid quality accidents.
 
 
 
5.盡量使用當期生産的膠,避免誇季使用本膠種,尤其避免冬膠夏用或夏膠冬用的情況。
 
5. Use the glue produced in the current period as far as possible to avoid using the glue species in the exaggerated season, especially in summer or winter.